50
Adaptive Hybrid Active
Noise Cancellation plus
Transparency Mode¹
50 dB ADAPTIVE HYBRID ACTIVE NOISE CANCELLATION
5 HD MICS WITH CLEAR VOICE TECHNOLOGY
SPATIAL AUDIO EFFECT
37 HOURS OF NON-STOP MUSIC
Adaptive Hybrid Active
Noise Cancellation plus
Transparency Mode¹
Custom dynamic driver with Ultra Bass Technology 2.0
37 HOURS
total playback
18 HOURS
with 10 minutes of charge³
Mics with Clear Voice Technology²
3-in-1 intuitive sound control
Dust and water resistance⁴
Master your sound on-the-move with the intuitive 3-in-1 Smart Dial⁵. Allows you to effortlessly adjust volume, play/pause or skip tracks, or control ANC – all with a quick spin or press.
Perfect for day-long use, the flexible cable moves with you when you’re on the go – offering ergonomic comfort. Choose from 3 eartip sizes for a fully personalised fit.
Combined with an energy-efficient processor, the massive 220 mAh battery delivers 37 hours of non-stop listening. Quick charging technology provides a swift power boost for 18 hours of playback.
37 hours of playback (ANC off)
23 hours of playback (ANC on)
with 10 minutes of charge (ANC off)
Driver: Custom 13.6mm dynamic
Diaphragm: PET (Titanium-Plated) + Custom PU
Audio codec: AAC, SBC
Technology:
Ultra Bass Technology 2.0
Spatial Audio Effect
Tuning: Nothing
Capacity: 220mAh
Battery life:
Playback (50% volume)
ANC off - 37 hours of playback
ANC on - 23 hours of playback
Transparency mode - 22 hours
Talk time (50% volume)
ANC off - 20.5 hours
ANC on - 18.5 hours
Transparency mode - 19 hours
Fast Charge:
ANC off - 10 min charge for 18 hours
ANC on / Transparency mode - 10 min charge for 11 hours playback
IP55
Press and hold the function button for 3 seconds:
Enter pairing mode
Separate the earbuds, press and hold the function button for 3 seconds until the white light blinks. Then select in Bluetooth settings on your device.
Double-press the function button:
Device switchover
Double-press the function button to return to the last connected device.
Smart Dial: Long-press for 1 second
Switch between Active Noise Cancellation and Transparency Mode
Smart Dial: Press
Music: pause / continue playing music.
Call: answer or hang up a call.
Smart Dial: Double-press
Music: play next song.
Call: reject incoming call.
Smart Dial: Triple-press
Music: play previous song.
Smart Dial: Rotate
Rotate anticlockwise to decrease volume.
Rotate clockwise to increase volume.
All features available on Nothing OS and the Nothing X app for iOS and other Android devices:
1. The noise cancellation limit of up to 50 dB is the theoretical maximum limit. This data comes from the Nothing laboratory. Since the actual noise cancellation achieved may vary depending on the specific environment, please refer to the performance of the actual product.
2. 5 HD mics in total. Clear Voice Technology is only applicable when the microphone is being used to record voice, e.g. taking a call or recording a voice message, and reduces ambient noise for the microphone.
3. 37 hours of audio playback, with the earbuds fully charged, Active Noise Cancellation turned off, 50% volume, and with AAC format and the rest of the features at default settings. Test results are based on the Nothing laboratory results (25° C or 77° F). Fast-charge the CMF Neckband Pro using a standard adapter or Type-C USB charging cable. Requires 5V⎓1A adapter or higher. Actual battery life is affected by volume, frequency and duration of incoming calls, output source, environmental interference, product features used, usage habits and other factors. Actual experience depends on individual use.
Fast Charge: Once the earbuds run out of power, fast-charge for 10 minutes, with Active Noise Cancellation turned off, 50% volume and AAC format and the rest of the features at default settings. After a 10-minute charge, the earbuds deliver up to 18 hours of music playback. Charging and battery test results are based on the Nothing laboratory results (25° C or 77° F). Charging and battery life test data was measured using Nothing Power (45W) at an ambient temperature (25° C or 77° F) in the Nothing laboratory. When the charging case is connected to a type-C cable, CMF Neckband Pro will fully charge from 0-100% in 60 minutes.
4. The CMF Neckband Pro has been tested under controlled laboratory conditions to IP55 rating in accordance with IEC 60529 (international) standards. Splash, water and dust resistance may decrease over time as a result of normal wear. It is recommended to avoid using the earbuds during extreme sports to prevent damage from sweat penetration. Do not charge a wet device or charge the device in moist environments. Do not submerge the device completely underwater or expose it to any liquid other than fresh water, such as seawater, chlorinated water or drinks. If the device has been immersed in water or the speaker is wet, sound may not be heard clearly.
5. Custom controls need to be turned on with a phone. For devices that are Nothing OS 1.5.6 and above, these functions can be set up in the phone settings by entering the Bluetooth interface. For other devices Android 5.0 and above, or iOS devices 13 and above, you can download and install the Nothing X app to set these up. CMF Neckband Pro allows customisable controls triggered by double press, triple press and press and hold. Customisable functions are next song, previous song, voice assistant and switching between Noise Cancellation Modes.
6. Before use, please separate the earbuds to trigger a new device pairing or reconnection. Fast Pair is available on all supported Android devices running Google Play services 11.7+, with compatibility back to Marshmallow (Android 6.0), while Find My Device and device renaming support are available from Android 10 onwards.
7. Default settings are defined by Nothing. For non-Nothing smartphone users, please download the Nothing X app for more operations. This is available for download on Google Play and iOS App Store. Historical and personal data are managed in accordance with our Privacy Policy. For Nothing OS users, all device settings and customisations are already integrated into Nothing OS version 1.5.6 and higher. All users must update the Nothing X app in Google Play Store before using to ensure all features are up to date.
8. Latency can be reduced to as low as 120 ms when the buds are paired with Nothing phone devices, with Game Mode turned on.
9. The reliability tests are conducted in the laboratory of Nothing and partners under specific conditions. The results may vary in actual environments and different conditions.
* Accessibility of some features may vary across regions. Product pictures and display contents on the foregoing pages are for illustration purposes only. Actual product features and specifications (including but not limited to appearance, colour and size), as well as actual display contents (including but not limited to backgrounds, UI and icons) may vary.
** All data in the foregoing pages are theoretical values obtained by the Nothing laboratory through tests carried out under particular conditions. For more information, refer to the aforementioned product details. Actual data may vary owing to differences in individual products, software versions, application conditions and environmental factors. All data is subject to actual usage.
*** Due to real-time changes involving product batches, production and supply factors and to provide accurate product information, specifications and features, Nothing may make real-time adjustments to text descriptions and images in the foregoing information pages, so that they match the product performance, specifications, indexes and components of the actual product. Product information is subject to such changes and adjustments without notice. Please refer to the specific information on https://cmf.tech.